hOmeLabs Bottom Loading Water Dispenser

Backed by a 2 year warranty, the hOmeLabs Bottom Loading Water Dispenser has a 4.7 star rating on Amazon from over 200 users. Designed for ease of use, this attractive water cooler makes a welcome addition to any home, office, gym, or commercial space. The 3 temperature settings also make it extremely versatile and useful throughout the year.

Assembly And Set Up

First, the hOmeLab Water Dispenser is already assembled when it comes out of the box. A user manual is included, with step by step instructions for operating the machine, as well as troubleshooting tips. You’ll also find details regarding the 2 year limited warranty that’s included with your water cooler, so it’s worth a read.

Setting up the hOmeLabs water dispenser is pretty straightforward. You’ll need approximately 8 inches of clearance in the back of the machines to allow sufficient airflow to the coils.

Oddly enough, the power cord is located, not near the bottom on the back of the device (as you might expect), but closer to the top. Positioning the cord here allows for very little reach, meaning you need to install the hOmeLabs water dispenser as close to an outlet as possible.

At 40 inches in height, or just over 3 ft, its narrow cabinet design makes it a great fit decor-wise for most interiors. The manufacturer advises against setting it up for outdoor use, which would nullify your warranty and potentially damage your water dispenser.

Don’t switch on your water cooler immediately after you’ve plugged it in. You’ll need to load the water dispenser with a fresh bottle of filtered or purified water first.

Temperature Settings

The hOmeLabs Bottom Loading Water Dispenser offers 3 convenient temperatures for water. Hot water dispenses at 185 degrees Fahrenheit, cold water dispenses at 49 degrees and room temperature is the ambient temperature.

Water is pumped from the water bottle to the cold tank and hot tank inside the dispenser by means of tubes. Once you plug in the water dispenser, the machine will need time to fill each of the tanks before it’s ready to use.

An intuitive control panel, located on the top panel, is very user-friendly. Each of the 3 push-buttons is clearly marked. You push down on the button to dispense water.

Energy Efficiency

For more efficient energy use, there are 2 switches on the back that control the compressor and the heating element for cold and hot water. These can be switched on individually as needed to reduce energy consumption. If you’re using the water cooler exclusively in your gym and don’t intend to make hot drinks, you can switch off the heating element. This way, the water cooler will only dispense cold or room temperature water.

Cleaning And Maintenance

No special cleaning solution is required to keep your hOmeLabs water cooler operating in peak condition. A Bottle Refill Indicator lights up to let you know when the water bottle needs replacing. The hot and cold tanks can be drained of excess water and should be rinsed with a cleaning solution as often as needed to remove any build up.

Accessing the cold and hot tank is fairly easy. There are four screws located on the back of the machine that connect the lid to the dispenser. Simply remove the screws and the lid can be lifted off, but there are wires attached that should remain in place. Always refer to the hOmeLabs user manual for proper directions.

Since the hOmeLabs Bottom Loading Water Dispenser uses filtered water, and the water tanks are made of stainless steel, frequent cleaning shouldn’t be necessary.

Drawbacks But Not Dealbreakers

One of the things you’ll notice about bottom loading water coolers is the flow rate tends to be low. Water is pumped up through a hose, then heated or cooled before being dispensed. The air pressure in the pump, however, can vary. The hOmeLabs water cooler manages to maintain a fairly consistent flow rate, but the hot water tends to have a lower flow rate than cold, meaning it may take a little longer than you might like to fill a cup of hot water.

While the push buttons on the top of the dispenser are very easy to use, they can become obstructed or difficult to push down on with use over time. Regular maintenance, however, should prevent the problem. There are also several troubleshooting tips covered in the manual to help you.

Why Should You Choose hOmeLabs?

There are a number of top brands you can choose from when searching for the best water cooler dispenser. With so many water cooler dispensers and brands to choose from, it can be hard to separate the chaff from the wheat. Is hOmeLabs a company you can trust?

The hOmeLabs motto, “Thoughtfully designed products. Exceptional Service”, really says a lot about the brand and its positioning. If you’re mindful about the environment, value healthy living, appreciate quality but don’t want to break the bank for a water cooler, hOmeLabs is a brand you can get behind.

Kitchen appliances, air purifiers, dehumidifiers, ice makers, refrigerators and air conditioners are a few of the household appliances hOmeLabs manufactures. Their sleek, stylish designs include innovative features for added convenience, safety and efficiency.

hOmeLabs appliances are designed to not only look good but save you money as well. Energy Star rated for efficiency, their broad range of water appliances offer homeowners and businesses an affordable way to reduce energy consumption while enjoying healthy air and water quality.

Backed by an amazing customer tech support team, hOmeLabs exceeds many of the top water cooler dispenser brands with their responsiveness, particularly when it comes to troubleshooting any problems with your purchase.

Final Thoughts…

Although hOmeLabs isn’t a leading manufacturer of water coolers, they can be trusted for quality and value. Their bottom loading water dispenser has quickly become a popular choice with Amazon users and compares admirably with any of the leading brands such as Avalon, Primo, and Brio.

The hOmeLabs Bottom Loading Water Dispenser has all the standard features you’d want in a quality water cooler, backed by great customer service and a 2 year warranty. The easy set up and maintenance means you can enjoy the convenience of filtered water for hot or cold beverages whenever you want, with the least amount of hassle.

We will be happy to hear your thoughts

Leave a reply